6 Causes of Small Faucet Flow

Small Faucet Flow

Even though it has been opened to the maximum, there are times when the water flow is small or even doesn’t come out at all. As a result, the activities of washing dishes and cleaning the house are hampered, right? Not only because it is clogged with dirt, but it also turns out that the cause of the flow of water taps in a small house can be due to the installation of pipes and the location of the town. Small water flow is not only caused by a damaged faucet condition. There are several causes for a small faucet flow.

Whether it’s the factor of improper pipe installation, inappropriate location of the tower, or even because of a problem with the water source at home. In full, here are 6 reasons for the small flow of water faucets that you need to pay attention to:

Problems With Water Sources

Apart from using PDAM water, many houses choose to use shallow wells to meet their clean water needs at home. Unfortunately, some people complain that the flow of shallow well water tends to be small and not heavy.

Generally, the cause of small shallow well water flow is due to problems with the water source. Whether it’s because of the water discharge which is affected by temperature, pressure, air, weather, or the location of the well that is not quite right.

Toren Is Not High Enough

If it has been proven that there is no problem with the water source, it could be that the cause of the low flow of the faucet is because the town’s position is not high enough. In fact, the height of the tower can affect the flow of tap water at home; small or heavy.

Simply put, the higher the position of the water tower in the house. So, the greater the water pressure that will flow to each faucet in the house. That way, the water discharge that comes out will be faster and faster.

Improper Water Pipe Installation

Apart from the less high position of the tower. The small flow of water taps can also be caused by the installation of water pipes that are not suitable. So, what is the relationship between the position of the pipe installation and the flow of water?

The condition of the water pipes that are not installed straight. Many turns, can inhibit the discharge of water that comes out to the faucet. Instead of being swift and fast, installing pipes with lots of bends actually results in a smaller and slower flow of water.

Pipe Clogged With Dirt

Water pipes can also be dirty due to the large amount of dirt or residue that sticks to the pipe walls. In no time, the dirt will turn into scale or sediment that accumulates along the pipeline.

If left unchecked, the accumulated dirt and scale will block the flow of water to the faucet. As a result, the tap water flow becomes small and there is a risk of total blockage.

Pipe Size Is Too Small

Rarely is it realized, but it turns out that inappropriate pipe sizes can affect the flow of water discharge at home. Therefore, make sure you only use the recommended pipe size, ok!

FYI, each tower has an outlet hole that has been adjusted to its capacity. In order for the water to flow again quickly, make sure you don’t use a pipe size that is smaller than the size of the outlet hole.

The use of pipe sizes that are too small can reduce the flow rate of water at home. This condition causes the water flow to become slower and smaller.

Do Not Use A Water Pump

It’s important to understand, every faucet in the house has a minimum value of water pressure requirements. That means if Mom wants all the faucets in the house to run fast water. So, we have to use a booster pump or booster pump.

As the name implies, the booster pump functions to increase the water pressure in the process of distributing water from the tower to every water tap point in the house. That way, the flow of the water faucet runs smoothly, stably, and fast