There may come a time when you have issues with your plumbing, whether it’s a clogged sink or plugged up toilet. Check out the tips and suggestions in the article below that will show you easy things you can do on your own to solve these issues, and save a call to a plumber.
Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.
Water hammer problems, pipe noise due to water hitting the back of the pipe, can be easily repaired. Those pipes will need to be anchored if they are exposed. It may be necessary to hire a professional to address noisy pipes that are located in less accessible places in your home.
Before starting any plumbing project on your own be sure to do a great deal of research. There are many resources available to assist you in understanding your plumbing system and help you to avoid many common mistakes made by do-it-yourself novices. Reading about other people’s mistakes can make the difference of saving or losing money.
If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.
If you have a clogged drain, don’t use cleaning chemicals to try to clear the clog. These harsh chemicals can corrode your metal pipes leading to leaks and broken pipes over time. Instead, stick to a plunger or make use of a plumbing snake to clear them.
Frozen and bursting pipes from harsh winter weather is a problem that no-one wants, so plan now to winterize your exterior faucets and pipes against freezing conditions. A simple way to accomplish this is to find the exterior water shut-off valve located inside your home (often located in the basement). Turn off the water valve to stop water flow, and then open up the outside faucets to drain out any water that has collected. Be sure to turn off the outside water faucets tightly after the water has drained out. Take in any hoses you may have outside so they don’t crack from the cold weather.
Make sure you clean out overflow holes in your kitchen and bathroom sinks on a regular basis. These holes are intended to act as an emergency fail-safe to prevent spillage from a full sink, but if they are clogged they can’t do their job. You can clean out an overflow hole using the same techniques you would for a clogged drain.
As was shown in the above article, there are many plumbing issues that can be handled by someone other than a plumber. Once you take the time to read how to do it, you will be amazed at the things you will be doing without the expense of an expert.